Upozornenie ! Vzhľadom na prechod na novú stránku by sme vás chceli požiadať aby ste sa nanovo registrovali.
Pre každého novo registrovaného člena máme 5% zľavu na prvý nákup.
Ďakujeme za pochopenie a dúfame že sa vám bude páčiť nový vzhľad.
1,50 palcovy RGB OLED Display Module, 65K RGB Colors, 128×128, SPI
1,50 palcovy RGB OLED Display Module, 65K RGB Colors, 128×128, SPI
1,50 palcovy RGB OLED Display Module, 65K RGB Colors, 128×128, SPI
1,50 palcovy RGB OLED Display Module, 65K RGB Colors, 128×128, SPI
1.5inch RGB OLED Display Module, 65K RGB Colors, 128×128 Resolution, SPI Interface
1.5″ RGB OLED DISPLAY MODULE
Embedded 1351 Driver, Using SPI Bus
Comes with examples for Raspberry Pi, Arduino, STM32, etc.
Features At A Glance
- 128×128 resolution OLED display, 65K RGB colors, clear and colorful displaying effect
- SPI interface, minimizes required IO pins
- Comes with development resources (examples for Raspberry Pi/Arduino/STM32)
Specifications
| OPERATING VOLTAGE | 3.3V/5V | RESOLUTION | 128×128 pixels |
|---|---|---|---|
| COMMUNICATION INTERFACE | 3/4-wire SPI | DISPLAY SIZE | 26.86 × 26.86 mm |
| DISPLAY PANEL | OLED | PIXEL SIZE | 0.045 × 0.194 mm |
| DRIVER | 1351 | DIMENSIONS | 44.5 × 37.0 mm |
Controlled Via SPI Bus
Supports Controller Boards Like Raspberry Pi/Arduino/STM32
| VCC | Power (3.3V/5V input) |
|---|---|
| GND | Ground |
| DIN | Data input |
| CLK | Clock input |
| CS | Chip selection, low active |
| DC | 4-wire SPI: Data/Command selection (high for data, low for command) 3-wire SPI: connect to GND, keeping low level |
| RST | Reset, low active |
Hardware Connection
Connecting With Raspberry Pi
Connecting With Arduino Board
Outline Dimensions
Weight: 0.02 kg
- 1.5inch RGB OLED Module x1
- PH2.0 7PIN cable x1
Dodatočné parametre
| Kategória: | 1 - 2 palcové displeje |
|---|---|
| Záruka: | 2 roky |
Buďte prvý, kto napíše príspevok k tejto položke.
Pridať komentár