2.13inch E-Paper HAT (G), 250x122, Red/Yellow/Black/White, SPI Interface

Neohodnotené

Značka: Waveshare

Dostupnosť	Skladom (2 ks)
Môžeme doručiť do:	2.5.2024
Možnosti doručenia
Kód:	SKU- 24908

20,20 € 16,83 € bez DPH

2.13inch E-Paper HAT (G), 250x122, Red/Yellow/Black/White, SPI Interface

Neohodnotené

Značka: Waveshare

30 dní

na vrátenie tovaru

Do 14:00 objednané

ešte dnes odoslané

Vernostné zľavy 5%

pre registrovaných zákazníkov

Popis
Diskusia

2.13inch E-Paper HAT (G), 250x122, Red/Yellow/Black/White, SPI Interface

2.13″ E-Paper HAT (G)

Low Power, Wide Viewing Angle, Paper-Like Effect Without Electricity

Ideal for price tags, shelf labels, industrial instruments...

Size2.13″
Resolution250×122
Viewing Angle>170°
Display ColorRed/Yellow/Black/White
Grey Scale2

CommunicationSPI
Display PanelE-paper
ExperiencePaper-like
EnvironmentAmbient Light Required
Display TypePassively Reflective

Features At A Glance

No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
SPI interface, for connecting with other controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc.
Onboard voltage translator, compatible with 3.3V/5V MCUs
Comes with online development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Specifications

OPERATING VOLTAGE	3.3V/5V	DISPLAY COLOR	Red/Yellow/Black/White
INTERFACE	3-wire SPI, 4-wire SPI	GREY SCALE	2
OUTLINE DIMENSIONS	65 × 30.2mm	FULL REFRESH TIME	25s
DISPLAY SIZE	48.55 × 23.70mm	REFRESH POWER	<10mW
DOT PITCH	0.1943 × 0.1942mm	STANDBY CURRENT	<0.01uA (almost none)
RESOLUTION	250 × 122 pixels	VIEWING ANGLE	>170°

Advantages Of EINK

E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.

Standard Raspberry Pi 40PIN GPIO Header

Compatible With Raspberry Pi Series Boards, Jetson Nano

for reference only, the Raspberry Pi Zero is NOT included.

Onboard SPI Control Interface

For Use With Controller Boards Like Arduino/STM32

VCC	Power (3.3V / 5V input)
GND	Ground
DIN	SPI MOSI pin
SCLK	SPI SCK pin
CS	SPI chip selection, low active
DC	Data/Command selection (high for data, low for command)
RST	External reset, low active
BUSY	Busy status output pin (high for busy)