Upozornenie!
Vitajte na našej novej stránke! Treba sa znova registrovať .
2,23 palcový OLED display HAT for Raspberry Pi 128x32
2,23 palcový OLED display HAT for Raspberry Pi 128x32
2,23 palcový OLED display HAT for Raspberry Pi 128x32
2,23 palcový OLED display HAT for Raspberry Pi 128x32
Overview
This is an OLED display HAT for Raspberry Pi, 2.23inch diagonal, 128×32 pixels, with embedded SSD1305 driver, communicating via SPI or I2C interface.
Trying to add a control interface for your Pi? This compact display would be the ideal choice.
Features
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
- Optional interfaces: SPI (default), or I2C, configured via onboard resistor
- Brings control pins for host boards like Arduino/STM32
- Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Specifications
- Driver: SSD1305
- Interface: SPI / I2C
- Display size: 2.23inch diagonal
- Display color: white
- Resolution: 128×32
- Viewing angle: >160°
- Power supply voltage: 3.3V/5V
- Logic level: 3.3V
Demo
Interface
| SYMBOL | RASPBERRY PI PIN (BCM) | DESCRIPTION |
|---|---|---|
| VCC | 3V3/5V | Power input |
| GND | GND | Ground |
| DIN | MOSI | SPI data input |
| CLK | SCLK | SPI clock input |
| CS | CE0 | Chip selection, low active |
| DC | P24 | Data/Command selection (high for data, low for command) |
| RST | P25 | Reset, low active |
Dimensions
Development Resources
Wiki : www.waveshare.com/wiki/2.23inch_OLED_HAT
Weight: 0.019 kg
- 2.23inch OLED HAT x1
- RPi screws pack (2pcs) x1
Dodatočné parametre
| Kategória: | 2 - 3 palcové displeje |
|---|---|
| Záruka: | 2 roky |
Buďte prvý, kto napíše príspevok k tejto položke.
Pridať komentár