2.66inch e-Paper Module (G), 360x184, Red/Yellow/Black/White, SPI Interface

Neohodnotené

Značka: Waveshare

Dostupnosť	Zvyčajne do 3-7 dní
Môžeme doručiť do:	6.5.2024
Možnosti doručenia
Kód:	SKU- 26337

24,46 € 20,38 € bez DPH

2.66inch e-Paper Module (G), 360x184, Red/Yellow/Black/White, SPI Interface

Neohodnotené

Značka: Waveshare

2.66inch e-Paper Module (G), 360x184, Red/Yellow/Black/White, SPI Interface

30 dní

na vrátenie tovaru

Do 14:00 objednané

ešte dnes odoslané

Vernostné zľavy 5%

pre registrovaných zákazníkov

Popis
Diskusia

2.66inch e-Paper Module (G), 360x184, Red/Yellow/Black/White, SPI Interface

2.66inch E-Paper Module (G), 360x184, Red/Yellow/Black/White, SPI Interface

2.66″ E-Paper Module (G)

Low Power, Wide Viewing Angle, Paper-Like Effect Without Electricity

Ideal for price tags, shelf labels, industrial instruments...

Size2.66″
Resolution360×184
Viewing Angle>170°
Display ColorRed/Yellow/Black/White
Grey Scale2
CommunicationSPI
Display PanelE-paper
ExperiencePaper-like
EnvironmentAmbient Light Required
Display TypePassively Reflective

Features At A Glance

No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
SPI interface, for connecting with other controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc.
Onboard voltage translator, compatible with 3.3V/5V MCUs
Comes with online development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Specifications

OPERATING VOLTAGE	3.3V/5V	DISPLAY COLOR	Red/Yellow/Black/White
INTERFACE	3-wire SPI, 4-wire SPI	GREY SCALE	2
OUTLINE DIMENSIONS	85.0 × 38.5mm	FULL REFRESH TIME	26s
DISPLAY SIZE	60.05 × 30.69mm	REFRESH POWER	<50mW
DOT PITCH	0.1668 × 0.1668mm	STANDBY CURRENT	<0.01uA (almost none)
RESOLUTION	360 × 184 pixels	VIEWING ANGLE	>170°

Advantages Of EINK

E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.

Onboard SPI Control Interface

For Use With Controller Boards Like Raspberry Pi/Jetson Nano/Arduino/STM32

VCC	Power (3.3V / 5V input)
GND	Ground
DIN	SPI MOSI pin
CLK	SPI SCK pin
CS	SPI chip selection, low active
DC	Data/Command selection (high for data, low for command)
RST	External reset, low active
BUSY	Busy status output pin
PWR	Power on/off control