Industrial USB TO TTL (D) Serial Cable, Original FT232RNL Chip, Multi Protection Circuits

Neohodnotené

Značka: Waveshare

Industrial USB TO TTL (D) Serial Cable, Original FT232RNL Chip, Multi Protection Circuits, Multi Systems Support, Suitable For Raspberry Pi 5 Serial Port Debugging

Dostupnosť	Zvyčajne do 3-7 dní
Môžeme doručiť do:	6.5.2024
Možnosti doručenia
Kód:	SKU- 26738

9,50 € 7,92 € bez DPH

Industrial USB TO TTL (D) Serial Cable, Original FT232RNL Chip, Multi Protection Circuits

Neohodnotené

Značka: Waveshare

Industrial USB TO TTL (D) Serial Cable, Original FT232RNL Chip, Multi Protection Circuits

30 dní

na vrátenie tovaru

Do 14:00 objednané

ešte dnes odoslané

Vernostné zľavy 5%

pre registrovaných zákazníkov

Popis
Diskusia

Industrial USB TO TTL (D) Serial Cable, Original FT232RNL Chip, Multi Protection Circuits, Multi Systems Support, Suitable For Raspberry Pi 5 Serial Port Debugging

Industrial USB TO TTL (D) Serial Cable, Original FT232RNL Chip, Multi Protection Circuits, Multi Systems Support, With Separated 4pin Header + SH1.0 3PIN Connector, Suitable For Raspberry Pi 5 Serial Port Debugging

Industrial USB To TTL Serial Cable Type D

Original FT232RNL | Stable Transmission | Multi Devices | Multi Systems

Suitable for serial port debugging of industrial equipments, supports Raspberry Pi 5

Industrial USB TO TTL serial cable, adopts original FT232RNL chip, onboard power supply and signal indicators, supports 3.3V/5V voltage level switching, built in self-recovery fuse, ESD and IO protection diode circuits, etc. It is compact in size, suitable for serial port debugging of industrial equipments and can be directly connected to the Raspberry Pi 5.

Specifications

PRODUCT CATEGORY	Industrial USB TO TTL serial cable
CHIP SCHEME	FTDI original FT232RNL
HOST PORT	USB
DATA RATE	300bps ~ 3Mbps
DEVICE PORT	UART
USB PORT	Connector: USB-A
USB PORT	Protection: self-recovery fuse, ESD protection
UART PORT	Connector: separated 4pin female header + SH1.0 3PIN fool-proof connector
UART PORT	Protection: IO protection diode
INDICATOR	PWR: power indicator, turns on when there is USB connection and voltage is detected
	TXD: TX indicator, turns on while the USB port is sending data
	RXD: RX indicator, turns on while the device port is sending data back
CABLE	Black, PVC sheath, total length 1m

Onboard Original Chips

Adopts Original FT232RNL Chips, Providing Better Stability And Compatibility

Raspberry Pi UART Debugging

Suitable For Raspberry Pi, Supports Multiple Connection Methods

Connect to PI5 UART Debug Connector Via SH1.0 3PIN cable

Connect To Raspberry Pi 40PIN GPIO UART Interface Via Separated 4PIN Header

for reference only, the Raspberry Pi 5 is not included.

Multiple Systems Support

Compatible With Popular Systems Like Win7/8/8.1/10/11, Mac, Linux, Android...

Three LED Indicators

Easily Checking The Operating Status, Convenient For Programming / Debugging

Pinouts Definition

VCC	3.3V or 5V output, configured by switch
GND	Ground
TXD	Connecting to MCU.RXD (signal direction: MCU.RX < < FT232 < < PC.TX)
RXD	Connecting to MCU.TXD (signal direction: MCU.TX > > FT232 > > PC.RX)