RS232/485/422 To CAN Industrial Isolated Converter, Supports Modbus RTU Conversion, Multiple Protect

Neohodnotené

Značka: Waveshare

RS232/485/422 To CAN Industrial Isolated Converter, Supports Modbus RTU Conversion, Multiple Protection Circuits

Dostupnosť	Zvyčajne do 3-7 dní
Môžeme doručiť do:	6.5.2024
Možnosti doručenia
Kód:	SKU- 26333

43,20 € 36 € bez DPH

RS232/485/422 To CAN Industrial Isolated Converter, Supports Modbus RTU Conversion, Multiple Protect

Neohodnotené

Značka: Waveshare

RS232/485/422 To CAN Industrial Isolated Converter, Supports Modbus RTU Conversion, Multiple Protect

30 dní

na vrátenie tovaru

Do 14:00 objednané

ešte dnes odoslané

Vernostné zľavy 5%

pre registrovaných zákazníkov

Popis
Diskusia

RS232/485/422 To CAN Industrial Isolated Converter, Supports Modbus RTU Conversion, Multiple Protection Circuits

RS232/485/422 To CAN
Industrial Isolated Converter

RS232/485/422 To CAN Data Conversion, Supports Modbus RTU Conversion

Multiple Industrial Protections Such As Galvanic Isolation, Lightningproof Protection, And ESD Protection. Suitable For Industrial Control Equipment And/Or Applications With High Communication Requirement

Features At A Glance

Supports data communication and conversion between RS232/485/422 and CAN interfaces
Compliant with CAN 2.0B (extended frame) specification, compatible with CAN 2.0A (standard frame) specification; Compliant with ISO 11898-1/2/3 standard
CAN baud rate: 10kbps~1000kbps, configurable
Supports 14 sets of configurable filters, can only receive CAN bus data in specific range and type
Supports 4 operating modes: transparent conversion, transparent with identifiers conversion, format conversion, and Modbus RTU protocol conversion
Up to 1000 frames CAN buffer for buffering transmission data to prevent data loss
Onboard unibody power supply isolation, provides stable isolated voltage, needs no extra power supply for the isolated terminal
Onboard unibody digital isolation, allows signal isolation, high reliability, strong anti-interference, low power consumption
Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & anti-electrostatic
Onboard 15KV ESD isolation protection and 600W lightningproof & anti-surge protection
Onboard 120R terminal resistor on the RS485/RS422 port, configurable by jumper
Supports device firmware upgrade via RS232/485/422, more convenient for firmware customization
Supports setting operation parameters via configuration software or serial commands, capable of saving settings after power off
Onboard power supply screw terminal, allows 5V~36V DC wide range input
4 LEDs for indicating the power and transceiver status
Industrial grade metal case, supports wall-mount and rail-mount installation, solid and beautiful, easy to install

Specifications

PRODUCT TYPE	Active digital isolated RS232/485/422 to CAN converter
POWER SUPPLY INTERFACE	Power supply	5~36V DC
POWER SUPPLY INTERFACE	Protection	Anti-reverse
DEVICE PORT	RS232/485/422, CAN
ISOLATED CAN	Connector	Screw terminal
	Direction control	Hardware automatic control
	Resistor	Onboard 120R matching resistor
	Baud rate	10kbps~1000kbps
ISOLATED RS232	Connector	DB9 female
	Transmission distance	about 15m
	Transmission mode	point-to-point
	Baud rate	1200bps~460800bps
ISOLATED RS485/422	Connector	Screw terminal
	Direction control	Hardware automatic control
	Protection	TVS diode, surge protection & ESD protection, power isolation and signal isolation
	Resistor	Onboard reserved 120R matching resistor, NC by default, enabled via jumper
	Transmission mode	Point-to-multipoints (485 mode: up to 32 nodes, it is recommended to use repeaters for 16 nodes or more； 422 mode: up to 256 nodes, it is recommended to use repeaters for 16 nodes or more)
	Baud rate	1200bps~460800bps
INDICATORS	PWR	Red power indicator, lights up when voltage is detected
	RUN	System operating indicator, turns off if CAN bus is abnormal
	COM	RS232/485/422 RX indicator, lights up when RS232 or 485 or 422 port receives data
	CAN	CAN RX indicator, lights up when CAN port receives data
OPERATING ENVIRONMENT	Temperature range	-15 ~ 70℃

Primary Function

Achieves Data Transmission And Conversion Between RS232/RS485/RS422 And CAN Interfaces

Supports Wide Range Baud Rate

RS232/485/422 Communication Baud Rate: 1200 ~ 460800bps
CAN Communication Baud Rate: 10kbps ~ 1Mbps

Supports Four Operating Modes

Transparent Conversion, Transparent With Identifiers Conversion, Format Conversion, And Modbus RTU Protocol Conversion

Supports Host Computer Configuration

Galvanic Isolated Design

Onboard unibody power supply isolation, provides stable isolated voltage, needs no extra power supply for the isolated terminal
Onboard unibody digital isolation, allows signal isolation, high reliability, strong anti-interference, low power consumption

Multiple Protection, Safe And Stable

Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & ESD protection. Onboard self-recovery fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock proof performance.