Upozornenie!

Vitajte na našej novej stránke! Treba sa znova registrovať . 

Získajte tým 5% zľavu!

 

Viac
    Registrácia
    Domov / IoT - moduly / Moduly - prenos a ukladanie dát / GSM / GPS / UMTS / LTE / 5G moduly / SIM7600X 4G Communication Module, Multi-band Support, Compatible with 4G/3G/2G,With GNSS Positioning

    SIM7600X 4G Communication Module, Multi-band Support, Compatible with 4G/3G/2G,With GNSS Positioning

    Neohodnotené
    Značka: Waveshare

    SIM7600X 4G Communication Module, Multi-band Support, Compatible with 4G/3G/2G, With GNSS Positioning

    Dostupnosť Skladom (1 ks)
    Môžeme doručiť do:
    2.5.2024
    Možnosti doručenia
    Kód: SKU- 23992
    69,99 € 58,33 € bez DPH
    SIM7600X 4G Communication Module, Multi-band Support, Compatible with 4G/3G/2G,With GNSS Positioning
    Neohodnotené
    Značka: Waveshare
    SIM7600X 4G Communication Module, Multi band Support
    30 dní na vrátenie
    30 dní
    na vrátenie tovaru
    Objednávka do 14:00
    Do 14:00 objednané
    ešte dnes odoslané
    Vernostné zľavy 5%
    Vernostné zľavy 5%
    pre registrovaných zákazníkov

    SIM7600X 4G Communication Module, Multi-band Support, Compatible with 4G/3G/2G, With GNSS Positioning

    SIM7600X 4G Communication Module, Multi-Band Support, Compatible With 4G/3G/2G, With GNSS Positioning, 4G Module Optional
    SIM7600X 4G Module

    Supports 4G/3G/2G Communication And GNSS Positioning

     
    Version Options

    Standard version
    3× IPEX antenna connector, comes with 2× yellow pin header and FPC antenna

     

    Pre-soldered version
    pre-soldered SMA main antenna connector and pin header, comes with SMA antenna

    Features At A Glance
    • Compatible with 2G/3G/4G network
    • Supports dial-up, telephone call, SMS, TCP, UDP, MQTT, DTMF, HTTP, FTP, etc.
    • Supports GPS, BeiDou, Glonass, GALILEO, QZSS, LBS base station positioning
    • Onboard USB and UART interface, for dial-up Internet access, cloud platform communication, GNSS positioning, etc.
    • Castellated holes with immersion gold design, small size, easy to integrate into the device by soldering directly or inserting via the pin header
    • Adapting USB/UART/SIM card/GPIO control pins, easy to develop and debug, better expansibility
    • Built in voltage translator, compatible with 3.3V/5V MCU motherboards such as STM32/ESP32/Arduino
    • Supports multiple power supply methods: USB port, VIN pin, and VBAT pin (for 3.7V lithium battery)
    • Onboard multiple protection circuits: TVS protection for SIM card, power supply isolation between the USB port and pin header, VIN pin power supply anti-reverse, and so on, more safe and reliable
    • 2x LED indicators, easy to monitor the operating status
    • Adopts SIMCOM recommended power supply solution, supports 5~26V wide voltage power supply and 3A high current output, to prevent the module from dropping and restarting due to the large instantaneous power consumption, more stable and reliable in industrial use.
    • Onboard Nano SIM card slot, supports 1.8V and 3V SIM cards, near the edge of the board design, for easy accessing SIM card
    • Comes with online development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
    • Adapting 3-ch antenna connector, IPEX antenna connector version and SMA connector version optional, supports mass customization
    Specifications
    SIM7600G-H 4G MODULESIM7600E-H 4G MODULE
    Applicable regionsGlobalEurope/Southeast Asia/West Asia/Africa/China/Korea
    FREQUENCY BAND
    LTE Cat-4LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B12/B13/B18
    /B19/B20/B25/B26/B28/B66
    LTE-TDD: B34/B38/B39/B40/B41    		LTE-TDD: B38/B40/B41
    LTE-FDD: B1/B3/B5/B7/B8/B20
    3GUMTS/HSDPA/HSPA+: B1/B2/B4/B5/B6/B8/B19UMTS/HSPA+: B2/B5
    2GGSM/GPRS/EDGE: 850/900/1800/1900 MHzGSM/GPRS/EDGE: 900/1800MHz
    GNSS
    Frequency bandGPS/Beidou/GLONASS/GALILEO/QZSS
    Receiver typeC/A Code
    16-channel
    Sensitivity-159 dBm (GPS) / -158 dBm (GLONASS) / TBD (BeiDou)
    Cold starts: -148 dBm
    Time-To-First-Fix (open air)Cold starts: <35s
    Hot starts: <1s
    SOFTWARE FEATURES
    Network protocolTCP/IP/IPV4/IPV6/MQTT/MQTTS/Multi-PDP/FTP/FTPS/HTTP/HTTPS/DNS
    Internet accessPPP/NDIS/RNDIS
    USB driverWindows XP/7/8/10/11, Linux (driver free on Raspberry Pi Raspbian system)
    SMSSupported types: MT, MO, CB, Text, PDU
    HARDWARE INTERFACE
    USB interfaceCan be used to access PC/Raspberry Pi/Jetson Nano and other hosts for 4G networking, positioning, AT command sending and receiving test, firmware upgrade, etc.
    UART interfaceCan be used to access MCU for 4G networking, positioning, AT command sending and receiving test, etc., compatible with 3.3V/5V working level
    SIM card slotOnboard Nano SIM card slot, adapting related pins, compatible with 1.8V and 3V SIM card
    Antenna connectorsMAIN: 4G main antenna (optional SMA connector or IPEX 1 connector version)
    AUX: 4G auxiliary antenna (IPEX 1 connector by default, can be mass-customized as SMA connector)
    GNSS: Positioning antenna (IPEX 1 connector by default, can be mass-customized as SMA connector)
    Other interfaceAdapting other common control pins such as GPIO, PWR, RST, FLT
    OTHER
    Power supplyUSB port or VBUS - GND pin: 5V power supply
    VIN - GND pin: 5V~26V wide-range voltage power supply
    BAT - GND pin: 3.7V lithium battery power supply
    Operating voltage3.3V by default (configurable as 3.8V-5V via VIO pin by connecting external voltage)
    Operating temperature-30°C ~ 80°C
    Storage temperature-45°C ~ 90°C
    Dimensions38.8 x 42.0mm

    4G / 3G / 2G Support

    Dial-Up On Windows/Linux

    LTE Cat-4: Up To 50Mbps (Uplink) / Up To 150Mbps (Downlink)
    3G (HSPA+): Up To 5.76Mbps (Uplink) / Up To 42Mbps (Downlink)

    Compatible With Multiple Platforms

    Provides Raspberry Pi/Raspberry Pi Pico/Jetson Nano/ESP32/Arduino/STM32 Demos
    And User Manuals, Easier To Develop And Integrate, And Better Expansibility

    Cloud Communication

    Supports Communication Protocols Including
    TCP, UDP, MQTT, MQTTS, FTP, FTPS, HTTP, HTTPS...


    GNSS Positioning

    Supports GPS, BeiDou, Glonass, GALILEO, QZSS, LBS Base Station Positioning

    * GNSS antenna is NOT included By default, please choose the GNSS antenna according to your needs:

    Active Ceramic Antenna
    Compact size, must be used in outdoor

     

    3m External Antenna
    Supports indoor positioning near the window area, with a 3m extension cable to place the antenna receiver outdoor

    SMS Sending And Receiving Support

    Making Telephone Call* Or Sending SMS By AT Commands

    * SIM7600X module supports telephone call function, since without adapting PCM and audio jack onboard, the AT commands and USB AUDIO development are required to realize telephone call via USB port
    Small And Easy Integration

    Castellated Design, Small Size, High Integration
    Adapting Most Of The Common Interfaces, Easy To DIY And Embed Into The Device

    Onboard Resources
    Pinout Definition
    PINDESCRIPTIONPINDESCRIPTION
    NETNetwork IndicatorGNDPower Ground
    FLTFlight modeDTRSleep mode wake up
    IO41Controll GPIO41 high or low level output by AT commandCTSUART flow control
    IO43Controll GPIO43 high or low level output by AT commandRTSUART flow control
    RIVoice call wake upTXDUART Sending
    SDSIM card dataRXDUART Receiving
    SRSIM card resetVIOVCCIO, default 3.3V when is not connected, configurable as 3.8V-5V via VIO pin by connecting external voltage
    SCSIM card clockVINwide voltage input, 5V~26V
    VSIMSIM card power supplyGNDPower Ground
    GNDPower groundBAT3.7V Lithium battery power input
    DPUSB signal cable Data+RTSModule reset pin
    DNUSB signal cable Data-PWKmodule power on/off pin
    VBUSUSB power supply cable3V3power supply output

    Hardware Connection Reference

    Connected To PC / Raspberry Pi / Jetson Nano Boards Via USB

     

    Connected To 5V* MCU Such As Arduino Via UART And VIN Power Supply Header

     

    * the VIO needs to be connected to 5V when the operating level of Arduino is 5V;
    and not connected when the operating level is 3.3V


    Connected To 3.3V MCU Such As ESP32 Via UART And 3V3 Power Output Header

    With VBAT 3.7V Lithium battery power input


    Product Show





    Outline Dimensions
    PACKAGE CONTENT

    Weight: 0.018 kg

    SIM7600X 4G Module

    1. OPTIONS SIM7600X 4G Module standard version x1
    2. FPC antenna x1
    3. 13PIN straight pin header x2
    1
    2
    3

    Dodatočné parametre

    Kategória: GSM / GPS / UMTS / LTE / 5G moduly
    Záruka: 2 roky

    Buďte prvý, kto napíše príspevok k tejto položke.

    Nevypĺňajte toto pole: