Upozornenie!
Vitajte na našej novej stránke! Treba sa znova registrovať .
Universal e-Paper Raw Panel Driver HAT
Universal e-Paper Raw Panel Driver HAT
Universal e-Paper Raw Panel Driver HAT
Universal e-Paper Raw Panel Driver HAT
Universal E-Paper Driver HAT, Supports Various Waveshare SPI E-Paper Raw Panels
Overview
This is a universal driver board for e-Paper raw panels, can be used to drive various SPI interface e-Paper from Waveshare.
Features
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
- SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
- Onboard voltage translator, compatible with 3.3V/5V MCUs
- Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
Specifications
- Operating voltage: 3.3V~5V
- Interface: 3-wire SPI, 4-wire SPI
- Outline dimension: 65mm × 30.2mm
- Mounting hole size: 3.0mm
Interface
| SYMBOL | DESCRIPTION |
|---|---|
| VCC | 3.3V~5V |
| GND | Ground |
| DIN | SPI MOSI pin |
| CLK | SPI SCK pin |
| CS | SPI chip selection, low active |
| DC | Data/Command selection (high for data, low for command) |
| RST | External reset, low active |
| BUSY | Busy status output |
Dimensions
Development Resources
Wiki : www.waveshare.com/wiki/e-Paper_Driver_HAT
- PACKAGE CONTENT
Weight: 0.021 kg
Note: e-Paper and Raspberry Pi are NOT included.
- e-Paper Driver HAT x1
- RPi screws pack (2pcs) x1
- PH2.0 20cm 8Pin x1
Dodatočné parametre
| Kategória: | Displeje pre Arduino |
|---|---|
| Záruka: | 2 roky |
Buďte prvý, kto napíše príspevok k tejto položke.
Pridať komentár