Upozornenie!

Vitajte na našej novej stránke! Zaregistrujte sa! 

Získate tým 5% zľavu na väčšinu produktov!

 

Viac
    Ceny v:
    Registrácia
    Domov / IoT - moduly / Vývojové dosky a klony / ARM , DSP , ESP , MCU , STM32 / ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7

    ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7

    Neohodnotené
    Značka: Waveshare

    ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor

    SKU: 25948

    Dostupnosť Skladom (5 ks)
    Môžeme doručiť do:
    31.8.2026
    Možnosti doručenia
    Kód: 21713
    43,08 € / ks 35,02 € bez DPH Jednotková cena:
    ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7
    Neohodnotené
    Značka: Waveshare
    SKU25948
    14 dní na vrátenie
    14 dní
    na vrátenie tovaru
    Objednávka do 12:30
    Do 12:30 objednané
    ešte dnes odoslané
    Vernostné zľavy 5%
    Vernostné zľavy 5%
    pre registrovaných zákazníkov

    ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor

    ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-Point Touch, 32-Bit LX7 Dual-Core Processor, Up To 240MHz Frequency, Supports WiFi & Bluetooth, With Onboard Antenna
    ESP32-S3-Touch-LCD-4.3

    Integrates RGB Interface LCD With 5-Point Capacitive Touch, Multiple Peripheral Interfaces

     
    Features

    ESP32-S3-Touch-LCD-4.3 is a microcontroller development board with 2.4GHz WiFi and BLE 5 support, integrates high-capacity Flash and PSRAM. Onboard 4.3inch capacitive touch screen can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications

    • Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency
    • Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna
    • Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and 8MB Flash
    • Onboard 4.3inch capacitive touch display, 800×480 resolution, 65K color
    • Supports capacitive touch control via I2C interface, 5-point touch with interrupt support
    • Onboard CAN, RS485, I2C interface and TF card slot, integrates full-speed USB port
    • Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios


    Application Scenarios

    Supports Multiple Peripherals

    Supports The Expansion Of Multiple Peripherals Via Sensor, CAN, RS485, And I2C Interfaces


    Application Example

    for reference only, please refer to the Package Content for the detailed part list


    What's On Board
    1. ESP32-S3N8R8
      The SoC with WiFi and Bluetooth, up to 240MHz operating frequency, integrated 8MB PSRAM and Flash
    2. SGM2212-3.3
      800mA low-noise LDO
    3. FSUSB42UMX
      for USB pins multiplexing
    4. Touch panel connector
    5. USB TO UART Type-C port
    6. USB Type-C port
    7. TJA1051T/3/1J
      CAN interface chip
    8. CH422G
      IO expansion chip
    9. BOOT button
      Press and hold while powering on for program burning
    10. RESET button
    11. MP3302DJ-LF-Z
      Screen backlight boost chip
     
    1. 4.3inch display panel connector
    2. TF card slot
    3. Sensor header
    4. CAN header
    5. I2C header
    6. RS485 header
    7. 3.7V single lithium battery PH2.0 header
    8. CAN terminal resistor selection
    9. RS485 terminal resistor selection
    10. CH343P
      USB to UART chip
    11. SP3485
      RS485 transceiver chip
    12. CS8501
      Lithium battery recharge manager
    13. Status Indicators
      PWR: Power supply indicator
      CHG: Lithium battery charging indicator
      DONE: Lithium battery charging completed indicator

    Product Show


    Outline Dimensions
    PACKAGE CONTENT

    Weight: 0.012 kg

    1. ESP32-S3-Touch-LCD-4.3 x1
    2. HY2.0 2P to 2PIN male cable 10cm ×2
    3. HY2.0 2P to 3PIN male cable 10cm ×1
    4. HY2.0 2P to 4PIN male cable 10cm ×1
    5. Standoff pack ×1
    1
    2
    3
    4
    5

    Diskusia

    Buďte prvý, kto napíše príspevok k tejto položke.

    Len registrovaní používatelia môžu pridávať príspevky. Prosím prihláste sa alebo sa zaregistrujte.

    Nevypĺňajte toto pole:

    Bezpečnostná kontrola

    Vložením komentáre súhlasíte s podmienkami ochrany osobných údajov